3.10
Power Supply Wiring
WISE-4671 modules are designed to support a standard unregulated 24-V
trial power supply. However, they can also accept 10 ~ 50 V
peak power ripple of 200 mV. The immediate ripple voltage should be maintained at
10 ~ 50 V
. The screw terminals labeled "+Vs" and "-Vs" are for the power supply
DC
wiring.
3.11
Block Diagram
Figure 3.7 WISE-4671 with WISE-S600/S600T Block Diagram
3.12
Configuration Interface
Interface: USB virtual COM port
Connector: Micro-B USB
USB Chipset: Silicon Labs CP210x
Driver: CP210x USB-to-UART bridge VCP drivers
WISE-4671 User Manual
DC
28
indus-
DC
input with a peak-to-