Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 61

LAG
Table 10: LAG Hashing mechanism for services configured on 7210 SAS-T Access-Uplink mode
Services and Traffic Direction
Epipe service:
SAP to SAP
IES service (IPv4):
IES SAP to IES SAP
NOTE:
1. The term 'Learnt' mentioned corresponds to Destination MAC.
2. Source/Destination MAC refer to 'Customer Source/Destination MACs' unless otherwise
3. VLAN ID is considered for Learnt - PBB, MPLS, Non-IP traffic in VPLS service only
4. Only outer VLAN tag is used for hashing.
Page 56
ration Guide
Packet fields used for Hashing for different
traffic types
IIP traffic: Source and Destination IP, Source
and Destination L4 ports, Ingress Port-Id.
PBB traffic: BDA, BSA, ISID, Ingress Port-Id
MPLS traffic (IP): MPLS label stack (Two
labels deep), Source and Destination IP,
Ingress Port-Id
MPLS traffic (L2): MPLS label stack (Two
labels deep), Ingress Port-Id
Non-IP traffic: Source and Destination MAC,
EtherType, Ingress Port-Id, VLAN
IPv4 unicast traffic: Source and Destination
IP, Source and Destination L4 ports.
specified.
for traffic ingressing at dot1q, Q.*, Q1.Q2 SAPs.
7210 SAS M, T, X, R6, R12, Mxp Interface Configu-