Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 235

Hardware Commands
CPM Output — The following table describes the output fields for a CPM card.
Slot
Card Provisioned
Card Equipped
Admin State
Operational
State
BOF last modified
Config file ver-
sion
Config file last
modified
Config file last
modified
Config file last
saved
CPM card status
Administrative
state
Operational
state
Serial number
Firmware revi-
sion
Model number
Size
Free space
Page 230
Guide
Label
The slot of the card in the chassis.
The SF/CPM type that is configured for the slot.
The SF/CPM type that is actually populated in the slot.
Up — The SF/CPM is administratively up.
Down — The SF/CPM is administratively down.
— The SF/CPM is operationally up.
Up
Down — The SF/CPM is operationally down.
The date and time of the most recent BOF modification.
The configuration file version.
The date and time of the most recent config file modification.
The date and time of the most recent config file modification.
The date and time of the most recent config file save.
active — The card is acting as the primary (active) CPM in a
redundant system.
standby — The card is acting as the standby (secondary) CPM in a
redundant system.
Up — The CPM is administratively up.
Down — The CPM is administratively down.
Up — The CPM is operationally up.
Down — The CPM is operationally down.
The compact flash part number. Not user modifiable.
The firmware version. Not user modifiable.
The compact flash model number. Not user modifiable.
The amount of space available on the compact flash card.
The amount of space remaining on the compact flash card.
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Description