Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 328

-------------------------------------------------------------------------------
1/1/3
1/1/5
2/1/3
2/1/4
-------------------------------------------------------------------------------
After forcing:
-------------------------------------------------------------------------------
Port-id
-------------------------------------------------------------------------------
1/1/3
no
1/1/5
yes
2/1/3
no
2/1/4
no
-------------------------------------------------------------------------------
redundancy
Syntax redundancy
Context show
Description
This command enables the context to show multi-chassis redundancy information.
multi-chassis
Syntax all
mc-lag peer ip-address [lag lag-id]
mc-lag [peer ip-address [lag lag-id]] statistics
sync peer [ip-address]
sync peer [ip-address] detail
sync peer [ip-address] statistics
Context show>redundancy
Description This command displays multi-chassis redundancy information.
Parameters all — Displays all multi-chassis information.
mc-lag — Displays multi-chassis LAG information.
peer ip-address — Displays the address of the multi-chassis peer.
lag lag-id — Displays the specified LAG ID on this system that forms an multi-chassis LAG configuration
with the indicated peer.
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
up standby
up standby
up active
up active
Adm Act/Stdby Oper
up active
up active
up standby
up standby down
down yes
down
up
up
Primary Sub-grp
up
up
down
Interface Configuration
2 -
2 -
1 -
1 -
Forced Prio Fld-Port
yes 2 active
2 active
1 -
1 -
32768 no
32768 no
32768 no
32768 yes
32768
32768
32768
32768
Page 323