Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 176
Service access switch
Hide thumbs
Also See for 7210 SAS M:
- Service manual (952 pages) ,
- Configuration manual (558 pages) ,
- Quality of service manual (404 pages)
Table of Contents
Advertisement
Parameters
sdh — Specifies the values used on a G.781 Option 1 compliant network.
sonet — Specifies the values used on a G.781 Option 2 compliant network.
tx-dus
Syntax
[no] tx-dus
Context
config>port>ethernet>ssm
config>port>sonet-sdh
Description
This command forces the QL value transmitted from the SSM channel of the SONET/SDH port or the
Synchronous Ethernet port to be set to QL-DUS/QL-DNU. This capability is provided to block the use of
the interface from the SR/ESS for timing purposes.
Default
no tx-dus
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
Interface Configuration
Page 171
Advertisement
Table of Contents
