Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 267

Port Show Commands
Active Alarms
Auto-negotiate
Alarm State
Collect Stats
Down-When-Looped
Down On Int. Error
CRC Mon SD Thresh
CRC Mon SF Thresh
CRC Mon Window
Egress Rate
Egress Buf (Acc)
Egress Buf (Net)
Egress Pool Size
Ingress Buf
(Acc)
Ingress Pool
Size
Configured
Address
Page 262
Guide
Label
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
The number of alarms outstanding on this port.
True — The link attempts to automatically negotiate the link speed
and duplex parameters.
False — The duplex and speed values are used for the link.
The current alarm state of the port.
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file.
Shows whether the feature is enabled or disabled.
Indicates if down-on-internal-error is enabled or not.
Indicates if signal-degrade threshold is configured or not.
Indicates if signal-fail threshold is configured or not.
Displays the value of window size used for CRC error monitoring
when the signal-degrade or signal-fail thresholds are configured.
The maximum amount of egress bandwidth (in kilobits per second)
that this Ethernet interface can generate.
The access-buffer policy for the egress buffer.
The network-buffer policy for the egress buffer.
The amount of egress buffer space, expressed as a percentage of the
available buffer space that will be allocated to the port for egress buff-
ering.
The access-buffer policy for the ingress buffer.
The amount of ingress buffer space, expressed as a percentage of the
available buffer space, that will be allocated to the port for ingress
buffering.
The base chassis Ethernet MAC address.
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Description (Continued)