Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 126

Port Ethernet Down-when-Looped Commands
config
Port Ethernet EFM OAM Commands
config
Port Ethernet LLDP Commands
config
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide
— [no] port {port-id}
— ethernet
— down-on-internal-error
— no down-on-internal-error
— down-when-looped
— [no] port {port-id}
— ethernet
— efm-oam
— [no] port {port-id}
— ethernet
— lldp
— max-auth-req max-auth-request
— port-control {auto | force-auth | force-unauth}
— quiet-period seconds
— [no] radius-plcy name
— re-auth-period seconds
— [no] re-authentication
— server-timeout seconds
— no server-timeout
— supplicant-timeout seconds
— no supplicant-timeout
— transmit-period seconds
— no transmit-period
— [no] tunneling
— keep-alive timer
— no keep-alive
— retry-timeout timer
— no retry-timeout
— [no] shutdown
— [no] accept-remote-loopback
— mode {active | passive}
— [no] shutdown
— [no] transmit-interval interval [multiplier multiplier]
— [no] tunneling
— [no] tunnel-nearest-bridge-dest-mac
Command Reference
Page 121