Alcatel-Lucent 7210 SAS M Interface Configuration Manual page 269

Service access switch
Hide thumbs Also See for 7210 SAS M:
Table of Contents

Advertisement

Port Show Commands
LLF Oper State
Rx S1 Byte
Tx DUS/DNU
Qinq etype
Reason down
Acc Egr Sch Mode
Sync. Status Msg.
Code-Type
Acc Egr Marking
Acc Egr Policy ID
Sample Output
*A:MTU-A# show port 1/1/1
===============================================================================
Ethernet Interface
===============================================================================
Description
Interface
Link-level
Admin State
Oper State
Physical Link
Single Fiber Mode
IfIndex
Last State Change
Last Cleared Time
Configured Mode
Dot1Q Ethertype
Net. Egr. Queue Pol: default
Egr. Sched. Pol
Auto-negotiate
Accounting Policy
Down-when-looped
Loop Detected
Down On Int. Error : Disabled
CRC Mon SD Thresh
CRC Mon SF Thresh
Page 264
Guide
Label
Displays the Link Loss Forwarding operational state.
Displays the received S1 byte and its decoded QL value.
Displays whether the QL value is forcibly set to QL-DUS/QL-DNU.
Displays the ethertype used for qinq packet encapsulation.
Indicates the reason for an operation state "Down".
Displays the port egress scheduler mode
Enabled- If SSM is enabled.
Disabled-If SSM is disabled.
Displays the encoding type of SSM messages as SONET or SDH.
Displays the type of marking enabled on the access egress policy.
(supported only on SAS-X)
Displays the policy ID of the access egress policy associated with the
port.
(supported only on SAS-X)
: 10/100/Gig Ethernet SFP
: 1/1/1
: Ethernet
: up
: up
: Yes
: No
: 35684352
: 06/27/2001 11:15:22
: 06/27/2001 11:14:44
: network
: 0x8100
: default
: limited
: None
: Disabled
: False
: Enabled
: Enabled
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Description (Continued)
Oper Speed
Config Speed
Oper Duplex
Config Duplex
MTU
Hold time up
Hold time down
Encap Type
QinQ Ethertype
Acc Egr Sch Mode : Fc-Based
Access Egr. Qos *: n/a
Network Qos Pol
MDI/MDX
Collect-stats
Keep-alive
Retry
CRC Mon Window
: 1 Gbps
: 1 Gbps
: full
: full
: 1578
: Internal
: 0 seconds
: 0 seconds
: 802.1q
: 0x8100
: n/a
: MDI
: Disabled
: 10
: 120
: 10 seconds

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas t7210 sas x7210 sas r67210 sas mxp os7210 sas r12

Table of Contents