Storage; Maintenance; Related Equipment - Elcometer Protovale 331 Operating Instructions Manual

S
TORAGE

20 STORAGE

This Covermeter incorporates a Liquid Crystal Display (LCD). If the
display is heated above 50°C (120°F) it may be damaged. This can
happen if the Covermeter is left in a car parked in strong sunlight.
Always store the Covermeter in its case when it is not being used.

21 MAINTENANCE

You own one of the finest covermeters in the world. If looked after, it will last a
lifetime.
Regular calibration checks over the life of the Covermeter are a requirement of
quality management procedures, e.g. ISO 9000, and other similar standards.
For checks and certification contact Elcometer or your Elcometer supplier.
The Covermeter does not contain any user-serviceable components. In the
unlikely event of a fault, the Covermeter should be returned to your Elcometer
supplier or directly to Elcometer.
Contact details can be found:
• Stored in the Covermeter (
• On the outside cover of these operating instructions.
• At www.elcometer.com

22 RELATED EQUIPMENT

Elcometer produces a wide range of concrete and coatings inspection
equipment. Users of the Elcometer Protovale 331 Concrete Covermeter may
also benefit from the following Elcometer products:
• Elcometer Adhesion and Bond Strength Testers
• Elcometer Concrete Crack Microscopes
• Elcometer Concrete Moisture Meters
• Elcometer Concrete Test Hammers
For further information contact Elcometer, your Elcometer supplier or visit
www.elcometer.com
62
R
MENU / ABOUT / CONTACT).