Table of Contents
Advertisement
R
free of charge from the downloads section of
the Elcometer website, www.elcometer.com.
2. Connect gauge to PC using optional 456 to PC
connection cable - see "PC Connection Cable"
on page 42.
3. Press
key to switch on gauge.
4. Ensure Reading Screen is displayed.
5. Run 'Welcome Screen Wizard' software and
follow the on-screen instructions.
8.2 DELETING THE SCREEN
1. Run the 'Welcome Screen Wizard' software.
2. Click 'Next'.
3. Select 'Create a new screen setup'.
4. Click 'Next'.
5. Select 'Disabled'.
6. Click 'Next'.
Follow the remaining on-screen instructions to
delete the welcome screen.
36
9 STORAGE AND TRANSIT
This gauge incorporates a Liquid Crystal
Display (LCD). If the display is heated
above 50°C (120°F) it may be damaged.
This can happen if the gauge is left in a
car parked in strong sunlight.
Always store the gauge in its carrying pouch when
it is not being used.
Remove the batteries from the gauge and store
them separately if the gauge is to remain unused for
a long period of time. This will prevent damage to
the gauge in the event of malfunction of the
batteries.
10 MAINTENANCE
You own one of the finest hand-held coating
thickness gauges in the world. If looked after, it will
last a lifetime.
The gauge does not contain any user-serviceable
components. In the unlikely event of a fault, the
gauge should be returned to your local Elcometer
supplier or directly to Elcometer. The warranty will
Advertisement
Table of Contents
