Storage; Maintenance - Elcometer 345 Operating Instructions Manual

R

8 STORAGE

This gauge incorporates a Liquid Crystal Display (LCD). If the display is heated above 50°C (120°F)
it may be damaged. This can happen if the gauge is left in a car parked in strong sunlight.
Always store the gauge in its carrying pouch when it is not being used.

9 MAINTENANCE

You own one of the finest hand-held coating thickness gauges in the world. If looked after, it will last a
lifetime.
The gauge does not contain any user-serviceable components. In the unlikely event of a fault, the gauge
should be returned to your local Elcometer supplier or directly to Elcometer. The warranty will be invalidated
if the instrument has been opened.
Regular calibration checks are a requirement of quality management procedures e.g. ISO 9000 and other
standards. For gauge checks and certification contact Elcometer or your local Elcometer supplier.
Details of Elcometer offices around the world are given on the outside cover of these Operating Instructions.
Alternatively visit the Elcometer website, www.elcometer.com
PROBES
The probe will wear with repeated use. Probe life depends on the number of measurements taken and the
manner in which readings are taken. To extend probe life, always set the probe down so that it is
perpendicular to the panel surface. Never drag the probe along the surface, as doing so will drastically
reduce the life of the probe.
Replacement of integral probes must be carried out by Elcometer. Separate probes can be fitted by the
user.
26