B
/D
ATCHING
ATA LOGGING
A bracketed asterisk [*] next to the batch name indicates that this is the currently
open batch (if any).
A complete list of the information given on a review batch screen is given in
"How to view the information in a batch" on page 49.
13.7 Delete batch
Deletes one memory batch.
1. Use Left/Right softkeys [
2. Press
to delete batch.
The Covermeter displays a confirmation screen.
3. Press Yes to confirm deletion, No to cancel.
13.8 Delete all batches
Deletes all batches from the Covermeter and stops batching.
1. The Covermeter displays a confirmation screen.
2. Press Yes to confirm deletion, No to cancel.
13.9 Free memory
Displays the amount of free memory (%) and then returns to the reading screen
after 2 seconds.
13.10 The BATCH softkey
The BATCH softkey provides rapid access to the
readings in a batch as you are taking them.
The BATCH softkey is only displayed on the reading
screen when a batch is open.
Once the BATCH softkey has been pressed, you can then;
•
scroll around the contents of a batch,
•
review, delete and overwrite readings,
•
skip memory locations,
•
and then return to the reading screen ready to take more measurements in
the same batch.
44
R
] to scroll to the batch you want to delete.