Table of Contents
Advertisement
2. Click 'Next'.
3. Select 'Create a new screen setup'.
4. Click 'Next'.
5. Select 'Disabled'.
6. Click 'Next'.
Follow the remaining on-screen instructions to delete the welcome screen.
8 ERROR MESSAGES
Under certain conditions the Half-Cell Meter will display error messages. These messages are normally
cleared by pressing any one of the softkeys. The cause of the error will be indicated by the message and
should be corrected before proceeding. If any error persists, contact Elcometer or your Elcometer Supplier.
9 STORAGE
This Half-Cell Meter incorporates a Liquid Crystal Display (LCD). If the display is heated above
50°C (120°F) it may be damaged. This can happen if the Half-Cell Meter is left in a car parked
in strong sunlight. Always store the Half-Cell Meter in its case when it is not being used.
R
23
Advertisement
Table of Contents
