Switching The Covermeter On And Off; The Display - Elcometer Protovale 331 Operating Instructions Manual

G
ETTING STARTED

3.4 Switching the Covermeter on and off

Note: Before switching the Covermeter on for the first time read "Selecting a
language" on page 12.
To switch the Covermeter on, press
To switch the Covermeter off, press and hold
Covermeter will beep, two single tones followed by a double tone, and will then
switch off.
The Covermeter includes an automatic switch off feature which will help to
extend the battery life (time between charges). The automatic switch off time
can be set to OFF, 5, 6, 7, 8, 9 or 10 minutes.
MENU / SETUP / AUTO SWITCH OFF
A countdown timer is displayed on the screen 60 seconds before the
Covermeter automatically switches off. The timer counts down from 60 to 0 to
warn you that the Covermeter is about to switch off. Press any key while the
countdown timer is displayed to cancel automatic switch off.

3.5 The display

Take some time to familiarise yourself with the information displayed on the
screen of your Covermeter. The screen shows:
• Welcome information
• Measurement information
• Menus to configure the Covermeter and control functions
• Help and miscellaneous information
When the Covermeter is switched on an opening (welcome) information
b
screen may be displayed briefly before the main reading screen appears.
The information
measurements, reviewing readings or setting up the Covermeter.
b. The opening (welcome) screen can be disabled.
MENU / SETUP / OPENING SCREEN.
Customised welcome screens can be created on a PC and downloaded into the
gauge - see "Personalised welcome screen" on page 61.
10
R
displayed depends upon
.
for two seconds. The
whether you are taking