Elcometer Protovale 331 Operating Instructions Manual page 58

T
RANSFERRING READINGS TO A COMPUTER
16.2 Elcometer Data Transfer Software
Elcometer Data Transfer Software, EDTS
enclosed with your Covermeter. This software allows linear batch data to be
transferred from your Covermeter to a PC using the data transfer cable.
The readings data stored in batches in your Covermeter are transferred directly
into a Microsoft Excel spreadsheet. The data can then be analysed and used to
create professional reports in software such as Word or Excel.
+
EDTS Excel Link can also be downloaded from the Elcometer website
www.elcometer.com
Software installation
+
EDTS Excel Link is compatible with computers operating on Windows™ 95
(service pack 1), 98, ME, NT, 2000 and XP. The installation conforms to the
standard Windows method using 'Setup.exe'.
Setting-up the software
+
1. Start EDTS Excel Link software.
2. Select gauge type 331.
Transferring data
Follow the on-screen instructions.
16.3 CoverMaster
®
CoverMaster software supplied on the CD enclosed with the gauge is
designed specifically for your Covermeter. CoverMaster
to-use software which simplifies setting up and using your Covermeter:
• Design batch templates on your PC and download these to your Elcometer
Protovale 331 Covermeter, ready for use on site.
• Download readings data from your Covermeter to the CoverMaster
management system.
• Store half-cell values recorded on site.
• Keep your survey notes, inspection reports, photographs and all your other
inspection information in one place - CoverMaster
• Create accurate and professional reports configured to allow your data to
be understood easily at all levels.
• Create PDF versions of your reports and e-mail direct from CoverMaster
For complete instructions on how to install and use CoverMaster
please refer to the separate instructions supplied with the software.
54
R
®
software
+
Excel Link, is provided on the CD
®
is powerful but easy-
®
.
®
data
®
.
®
software,