Figure 1. Elcometer Protovale 331 Model T Concrete Covermeter
1.3 Standards
The Elcometer Protovale 331 Model T Concrete Covermeter can be used in
accordance with the following National and International Standards:
ACI 318
DIN 1045
1.4 Conventions in these instructions
A simple menu structure helps you get the most from your Covermeter - see
"The menus" on page 14. There are many references to this menu structure in
these instructions.
As an example, the LANGUAGE option which is in SETUP from the MAIN
MENU would be shown in these instructions as:
MENU / SETUP / LANGUAGE
These instructions include images of Elcometer Protovale 331 screens with
units set to millimetres (mm). Similar screens will be seen when the Covermeter
is set to inches.
BS1881:204
EC2
A
CP 110
SIA 162
C
BOUT YOUR
OVERMETER
R
3