Advertisement
R
4 STORAGE
Always store the gauge in its case when it is not being used.
5 MAINTENANCE
Elcometer Viscosity Dip Cups are designed to give many years reliable service under normal operating and
storage conditions.
Regular calibration checks over the life of the gauge are a requirement of quality management procedures
e.g. ISO 9000 and other standards.
b
To check for wear, use Elcometer 2410 Viscosity Standard Oils
and measure the drain time. If wear is
detected, contact Elcometer or your local Elcometer supplier.
Details of Elcometer offices around the world are given on the outside cover of these Operating Instructions.
Alternatively visit the Elcometer website, www.elcometer.com
b.
See "Elcometer 2434/5/6/7 Frikmar: Anodised Aluminium" on page 8 for ordering information.
7
Advertisement
