Table of Contents
Advertisement
3.6 Switching the Covermeter on and off
Note: Before switching the Covermeter on for the first time read "Selecting a language" on page 11.
To switch the Covermeter on, press [
To switch the Covermeter off, press and hold [
single tones followed by a double tone, and will then switch off.
The Covermeter includes an automatic switch off feature which will help to extend the battery life
(time between charges). The automatic switch off time can be set to OFF, 5, 6, 7, 8, 9 or 10 minutes.
MENU / SETUP / AUTO SWITCH OFF
A countdown timer is displayed on the screen 60 seconds before the Covermeter automatically
switches off. The timer counts down from 60 to 0 to warn you that the Covermeter is about to switch
off. Press any key while the countdown timer is displayed to cancel automatic switch off.
3.7 The display
Take some time to familiarise yourself with the information shown on the display of your
Covermeter. The display shows:
•
Welcome information
•
Measurement information
•
Menus to configure the Covermeter and control functions
•
Help and miscellaneous information
When the Covermeter is switched on an opening (welcome) information screen
briefly before the main reading screen appears.
The information shown depends upon whether you are taking measurements, reviewing readings
or setting up the Covermeter.
The main screen displayed (while you are taking measurements) is the Reading Screen.
d.
The opening (welcome) screen can be disabled.
MENU / SETUP / OPENING SCREEN.
Customised welcome screens can be created on a PC and downloaded into the gauge - see "Personalised
welcome screen" on page 30.
].
] for two seconds. The Covermeter will beep, two
R
G
ETTING STARTED
d
may be displayed
9
Advertisement
Table of Contents
