Switching The Gauge On; Switching The Gauge Off - Elcometer 456 Operating Instructions Manual

2.5 Switching the gauge on

Gauges with separate
and PINIP™ probes:
Press
on gauge.
Gauges with integral
probes:
Press
on gauge, or place the
probe on a surface.
Note: Before switching the gauge on for the first time
read "Selecting a language" on page 11.

2.6 Switching the gauge off

To switch off all gauge
types, press and hold
key for 3 seconds.
The gauge will beep,
two single
followed by a double
tone.
The Elcometer 456
the last operation unless the Auto Switch Off time is
changed (MENU/SETUP/AUTO SWITCH OFF). The
Auto Switch Off feature can be set to a maximum of 10
minutes or can be deactivated - see "AUTO SWITCH
OFF:" on page 21.
key to switch
key to switch
tones
2
switches itself off 60 seconds after
R
09 : 30 09 / 1 0 / 20 00
456 F1
F
µm
C AL D ATA STA TS MEN U
R
3 seconds
R
9