Switching The Gauge On And Off - Elcometer Novo-Gloss 402 Operating Instructions Manual

Some buttons have two functions, the primary function is shown in normal text, the secondary function is
shown in reverse text. The second function is operated by first pressing the yellow 2nd function button, and
then the appropriate dual function button, similar to a pocket calculator. For example, to activate the Reset
function, press the yellow Stats/2nd button, followed by the Delete/Reset button. This would be written in
the text in this manual as 2nd/RESET. To activate the DELETE function you would only press the Delete/
Reset button, which would be written in this manual as DELETE.

2.4 SWITCHING THE GAUGE ON AND OFF

Press and release the red ON button. The gauge will switch on with a display showing the gauge type, and
manufacturer, e.g:
8
Delete
Reset
Stats
2nd
On
Statistical Glossmeter
Figure 3. Control panel of triple angle Glossmeter
NOVO-GLOSS
Elcometer Instruments
Set cal Cal
Output Cal
Angle Read