2.4 THE CONTROLS
The gauge is operated by 5 keys (Figure 3).
•
On/Off key
: Switches the gauge on or off.
•
Softkeys: The function of these keys varies
and is described by symbols and writing on the
bottom line of the screen.
•
LED: Red/green flashes when the gauge is
switched on, green flashes when a reading is
taken. Also indicates when a reading is inside
or outside limits - see "Set limits" on page 39.
Figure 3. Elcometer 456
LED
Softkeys
On/Off key
R
control keys
3
2.5 SWITCHING THE GAUGE ON
Gauges with separate
and PINIP™ probes:
Press
key
to
switch on gauge.
Gauges with integral
probes:
Press
key
to
switch on gauge, or
place the probe on a
surface.
Note: Before switching the gauge on for the first
time read "Selecting a language" on page 11.
R
R
09 : 30
09 / 10 / 2000
456
F1
F
CAL
DATA
STAT S
MENU
R
9