Changing The Scanner Server Start Up Mode - Epson GT-10000+ User Manual

8. Follow the instructions on the screen to
install EPSON Scan Server. When you
see the window on the right, make sure
is selected under Scanner
GT-10000
Selection.
Select either
Icon
scanner server start up mode. (See
"Changing the Scanner Server Start Up
Mode" below for details about the start up
mode.)
9. Click to test scanner operation.
Test
OK. Scanner available
Status if the scanner is communicating
with the scanner server. Click
the window.
If you want to share a different network scanner with the client
computers, you can access the EPSON Scan Server window at any time
by double-clicking the EPSON Scan Server icon in the Windows Control
Panel. Then select the scanner you want in the Scanner Selection list.
10. Follow the instructions on the screen to complete installation of any other
software you've selected in the EPSON Software Setup window. If you're done
installing software, restart your computer.
If you want to install PhotoDeluxe, see page 45 for instructions.

Changing the Scanner Server Start Up Mode

You can set up the scanner server to start in either Dialog Box or Icon mode.
In Dialog Box mode, the
window below appears
whenever you start
EPSON Scan Server.
or as the
Dialogbox
appears under
to close
OK
click here and
select Taskbar
Icon to switch
to Icon mode
Network Scanning
85