Setting Up The Default Scanner - Epson GT-10000+ User Manual

Setting Up the Default Scanner

If you have more than one scanner connected to your computer and you're running
Windows Me, Windows 98, or Windows 2000, you can set up the EPSON
GT-10000+ as your default scanner.
1. Click
Start
double-click the
2. In Windows 98 or Windows 2000,
you see the Scanners and Cameras
Properties window. Select
GT-10000
Properties
In Windows Me, double-click the
EPSON GT-10000
3. Click the
as default scanner for EPSON TWAIN
is checked, and then click
Pro
4. In Windows 98 or Windows 2000, click
to close the Scanners and Cameras
OK
Properties window.
The default scanner remains in effect until
you use this procedure to change it again.
46
Installing Scanner Software
, , then
Settings Control Panel
Scanners and Cameras
EPSON
, if necessary, and click the
button.
icon.
tab. Make sure
Utility
. In the Windows Control Panel,
icon.
Select
.
OK