Installing The Software For Windows 95; Installing The Scanner Driver - Epson GT-10000+ User Manual

Installing the Software for Windows 95

Follow the instructions in this section to install your EPSON GT-10000+ scanner
driver and other software on your scanner software CD-ROM.
If you want to use your scanner on a network, follow the steps in the section
below to install the scanner driver on the scanner server, then go to Chapter 6,
"Network Scanning," to install other scanner software and the software for client
systems.

Installing the Scanner Driver

You may be asked to insert your Windows CD-ROM during this procedure.
Make sure you have your Windows CD-ROM available, or know where to find the
Windows source files on your hard drive. If you need help locating your source files,
contact your computer manufacturer.
1. Make sure your SCSI board and SCSI driver are installed and the scanner is
connected to your computer (as described in Chapter 1).
2. Turn on your scanner first, then turn
on your computer. When you see the
window on the right, click
34
Installing Scanner Software
.
Next