Epson GT-10000+ User Manual page 29

6. When you see the screen on the right
prompting you for the location of the
driver, check
Specify a location
Browse to the following location on
the CD-ROM:
Then click
Next
(The example screen shows D as
the CD-ROM drive letter; your
CD-ROM drive letter may be
different.)
7. The necessary driver files are copied to your hard drive, then you see a prompt to
restart your system. Be sure to close any open windows, then click
8. After the system restarts, log on again. Windows NT automatically detects the
scanner.
9. To verify that the SCSI card was detected, click
and double-click
should see your
dialog box.
Continue with the instructions on page 42 to install your scanner software.
.
.
Adaptec\Ezscsi
.
. Then click the
SCSI Adapters
Adaptec PCI SCSI Controller
Yes
, ,
Start Settings Control Panel
tab, if necessary. You
Devices
in the list. Click
OK
Setting Up Your Scanner
to restart.
,
to close the
21