Changing The Scanner Server Start Up Mode - Epson Expression 1600 User Manual

Changing the Scanner Server Start Up Mode

When you installed the software, you set up the scanner server to start in either Dialog
Box mode or Icon mode.
In Dialog Box mode, the following dialog box appears whenever you start EPSON
Scan Server. (The message
the scanner is waiting for a connection to a client computer.)
Click here and select
Taskbar Icon to switch
to Icon mode.
In Icon mode, the EPSON Scan Server icon
when you start EPSON Scan Server.
To change from Dialog Box mode to Icon mode, click the scanner icon in the
upper left corner of the dialog box and select
To change from Icon mode to Dialog Box mode, right-click the EPSON Scan
Server icon on the taskbar and click
Your setting takes effect when you exit and restart EPSON Scan Server. See "Starting
EPSON Scan Server" on page 89 for instructions on restarting EPSON Scan Server.
Make sure no client computer is connected to the scanner
server when you exit EPSON Scan Server.
Waiting for connection
Taskbar Icon
in the status area indicates that
appears on the Windows taskbar
from the list.
Taskbar Icon
to deselect it.
81