Indicator Lights - Epson GT-10000+ User Manual

Indicator Lights

If an error occurs, the scanner stops operating. The READY and ERROR lights
indicate the type of error.
Light
OPERATE
READY
ERROR
ERROR
light
On
Flashing
Flashing
Off
96
Solving Problems
Light status
On
On
Flashing
On
Flashing
READY Error type
light
On Command error
Off Interface error
Flashing Fatal error
Off Option error
Color Scanner status
Green Scanner is on.
Green Ready to scan images.
Scanning is in progress.
Red An error occurred; see the
following table for more
information.
Solution
The scanner has received incorrect
commands from your scanning software.
Try rescanning the document.
Check that your scanner is securely
connected to your computer, and then turn
the scanner off and back on again.
Make sure the transportation lock is in the
unlocked position, then turn the scanner off
and on again. If this doesn't solve the
problem, call your EPSON dealer.
Check to make sure the optional automatic
document feeder (ADF) is installed
correctly, and that it's lying flat on the
document table. Also, check that the ADF
isn't out of paper and doesn't have a paper
jam. If this doesn't solve the problem, call
your EPSON dealer.