Appendix A Installing The Tcp/Ip Protocol; Installing The Tcp/Ip Protocol On Windows Me, Windows 98, And Windows 95 - Epson GT-10000+ User Manual

Appendix A
Installing the TCP/IP Protocol
To use your EPSON GT-10000+ as a network scanner, the computers must be
configured and operational on an existing network with the TCP/IP Protocol
installed. In addition, both the scanner server and client computers must have an IP
address and subnet mask assigned. If you aren't sure what IP address or subnet mask
to use, ask your network administrator.
If you're running DHCP and WINS, or if you have a DNS server, you may
find it easier to use a host name rather than an IP address to identify the
scanner server. To specify a host name, you must enable DNS. See your
Windows documentation for instructions.
Installing the TCP/IP Protocol on
Windows Me, Windows 98, and Windows 95
1. Double-click the
Control Panel. If necessary, click the
Configuration
the right.
2. Check that
TCP/IP
installed network components.
If it appears in the list, go to "Assigning an IP
Address" on page 112.
If you don't see
with the next step.
3. Click the
Add
icon in the
Network
tab to display the screen on
appears in the list of
in the list, continue
TCP/IP
button.
111