Epson GT-10000+ User Manual page 23

If you don't see the Add New Hardware Wizard, you can check to see if
the SCSI card was installed automatically: click Start, Settings, Control
Panel. Double-click System and then click the Device Manager tab.
Double-click SCSI and RAID controllers and check to see if your Adaptec
SCSI adapter is there. If Windows is unable to detect the SCSI card, see
"Setup Problems" on page 97.
2. If you see the Add New Hardware Wizard screen, insert the EPSON GT-10000+
Scanner Software CD-ROM in your drive, select
, and click
driver
3. Select
Specify a location
.
Browse
4. Browse to
Adaptec\EZSCSI
drive. (The example to the right uses E as the
CD-ROM drive letter. Your CD-ROM drive
letter may be different.) Click
Browse window, and then click
.
Next
and click
on your CD-ROM
to close the
OK
Next
Specify the location of the
.
Setting Up Your Scanner
15