Assigning An Ip Address - Epson GT-10000+ User Manual

Assigning an IP Address

If your network is connected to the Internet, ask your Internet provider or system
administrator for a formal IP address.
If your network is not connected to the Internet, you can use any IP address in the
following ranges: 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255, or
192.168.0.0 to 192.168.255.255. Make sure you use a different IP address for every
computer on your network.
If you use IP addresses in the ranges listed above, you need to change
them before you connect the network to the Internet. Otherwise you'll
experience IP address conflicts.
If your network uses a DHCP server, you don't need to obtain an IP
address before beginning this procedure; the server finds one for you.
Follow the steps below to assign the IP address to your computer:
1. Select
TCP/IP Protocol
then click the
Properties
2. Click the
IP Address
screen on the right.
3. Click
Specify an IP address
your IP address and Subnet mask. Click
If you're using a DHCP server on your network, you can assign an IP
address automatically by selecting Obtain an IP address automatically
and clicking OK.
4. Click again to close the Network window and have your IP address
OK
assignment take effect.
in the Network Protocols list on the Protocols tab, and
button.
tab to display the
, and then enter
OK
.
Installing the TCP/IP Protocol
119