Epson GT-10000+ User Manual page 26

7. To verify that the SCSI card was detected, click
then double-click the
You should see
should see
box.
8. When you're finished, restart your computer.
If you're running Windows 98, continue with the instructions on page 30 to install
your scanner software. If you're running Windows 95, continue with the instructions
on page 34.
Installing the SCSI Software for Windows 2000
Windows 2000 automatically detects and installs your SCSI card. Follow these steps
to check to make sure the card is installed correctly and Windows has detected it:
1. Turn on your computer.
2. Click
Start
3. Double-click the
System Properties window.
4. Click the
Device Manager
18
Setting Up Your Scanner
System
SCSI controllers
Adaptec AIC-78XX PCI SCSI
, , then
Settings Control Panel
System icon in the Windows Control Panel to open the
tab, then click
Hardware
.
Start
icon. Click the
Device Manager
in the list. Click the
in the list. Click
.
, ,
Settings Control Panel
tab, if necessary.
to expand the list. You
+
to close the dialog
OK
,