Epson GT-10000+ User Manual page 24

5. Select
The updated software
click
Next
the screen.
If you see a message asking for your
Windows CD-ROM, insert it and
click
OK
the Windows source files on your hard
drive; then click
6. Click
Finish
that installation is complete.
Continue with the instructions on page 25 to install your scanner software.
Installing the SCSI Software for Windows 98 or
Windows 95
You may be asked to insert your Windows operating system CD-ROM during
software installation. Please have your Windows CD-ROM handy, in case it is
needed.
1. Turn on your computer. During the Windows start-up sequence, a screen appears
saying that your system has detected new hardware.
If you don't see the Add New Hardware Wizard, you can check to see if
the SCSI card was installed automatically: click Start, Settings, Control
Panel. Double-click System and then click the Device Manager tab.
Double-click SCSI controllers and check to see if your Adaptec SCSI
adapter is there. If Windows is unable to detect the SCSI card, see "Setup
Problems" on page 97.
16
Setting Up Your Scanner
. Follow the instructions on
(or click and locate
Browse
).
OK
when you see a message
then