Assigning An Ip Address - Epson GT-10000+ User Manual

7. Select
Internet Protocol
(TCP/IP)
list box and click
8. Check that
box and click

Assigning an IP Address

If your network is connected to the Internet, ask your Internet provider or system
administrator for a formal IP address.
If your network is not connected to the Internet, you can use any IP address in the
following ranges: 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255, or
192.168.0.0 to 192.168.255.255. Make sure you use a different IP address for every
computer on your network.
If you use IP addresses in the ranges listed above, you need to change
them before you connect the network to the Internet. Otherwise you'll
experience IP address conflicts.
If your network uses a DHCP server, you don't need to obtain an IP
address before beginning this procedure; the server finds one for you.
Follow the steps below to assign the IP address to your computer:
1. Right-click the
double-click
116
Installing the TCP/IP Protocol
in the Network Protocol
.
OK
Internet Protocol (TCP/IP)
.
OK
My Network Places
Local Area Connection
appears in the Local Area Connection list
icon, then select
Properties
.
and