Connecting An Rgb Video Source - Epson PowerLite 9300i User Manual

Setting Up the Projector
24

Connecting an RGB Video Source

Follow these instructions to connect the projector to a video player
that has an RGB video output port. Depending on the type of
connector on your player, you'll need to use the appropriate cable:
If your player has a single VGA connector, see below.
■
■ If your player has three connectors labeled R/G/B, see
"Connecting Using a BNC Cable" on page 25.
Connecting Using a VGA Computer Cable
1. Locate the VGA computer cable provided with the projector.
2. Connect the cable to the video port on your player and the
or
Computer 1 Computer 2
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image. Once the projector is turned on, be sure to:
Enter the projector's Setting menu, then change the
■
Computer1 Input (or Computer2 Input) setting to
(see page 75).
RGB-Video
■ After exiting the menu system, select
) as the source to see your image (see page 38).
Computer 2
port on the projector.
Computer 1
(or