Restoring The Default Settings - Epson PowerLite 9300i User Manual

4. After highlighting the option you want to adjust, use the
pointer button to change the setting. In some cases, you may
have to press the
Enter
the setting.
■ Press the left or right side of the
a slider bar.
■ To select a setting, use the
desired setting, then press
5. After changing the settings, press the
changes and return to the previous menu (or press it repeatedly to
exit the menu system).
You can also press the

Restoring the Default Settings

You can use the menu system's Reset options to restore the factory-
default settings for:
all the settings listed in a specific menu
■
■ all the settings in all menus
To restore the settings in a specific menu, enter the menu whose
settings you want to change, select
(The example below shows how to reset the Video menu.)
Video
Audio
Effect
Setting
User's Logo
Advanced1
Advanced2
About
Reset All
Reset All
Reset
[ ]: Select [
To restore all the projector settings to their factory-default values,
select .
Reset All
button to see a sub-screen for changing
pointer button to adjust
pointer button to highlight the
.
Enter
E
SC
button to exit.
Menu
, and confirm as needed.
Reset
Position
Adjust
Tracking : 0000
Sync. : 0
Brightness : 0 -
Contrast :
Auto Manual
Sharpness : 0
-
Color Mode Select [Presentation
Resolution : :
Manual
Auto
: [
Preset
Set
Reset
Execute
]: Enter
button to save your
+
Adjust
+
]
Select
]
[Menu]: Exit
note
The Reset All option does
not reset the Input signal,
User's Logo, Language,
Projector ID, Network, and
Lamp settings.
Fine-tuning the Projector
67