2. If you'd like to register a projector manually and you know its IP
address, click the
Projector address selection
You see this screen:
3. Enter the projector's IP address and click
icon is added to the EMP NetworkManager screen.
Setting a Password
You can set a password to restrict access to each projector from EMP
NetworkManager:
1. Right-click the icon of the projector whose password you want to
set, then select
Change Password
2. Enter a password—up to 14 characters long—using
alphanumerics only, including the hyphen (-).
icon.
. The projector's
Add
.
Managing the Projector from a Remote Computer
93