Epson PowerLite 9300i User Manual page 114

Solving Problems
114
The image is stretched, compressed, cut off, or doesn't fit on
the screen.
■ Press the button on the remote control to make sure the
Resize
projector is displaying at the correct resolution or aspect ratio.
If you've connected equipment to the Computer 1, Computer 2,
■
or BNC port, the wrong input signal setting may be selected.
Select the correct setting, depending on the type of computer or
video player you've connected (see page 75).
If you're projecting from a computer, press the
■
the remote control) or the
projector). This automatically resets the projector's tracking, sync,
resolution, and position settings. (To adjust these settings
yourself, see page 69.)
■ If you're projecting from a computer, the computer may have
been set for dual display. This causes the projector to display only
half the image (the right or left side). Access your computer's
display settings (as you would to adjust other display properties—
see page 39), then turn off dual display. See your computer's
manual or online help for details.
■ You may have to adjust the
slightly off-center (see page 71).
The image isn't square, but tapered on the sides.
If you've tilted up the projector by extending the legs, the image
■
will be broader at the top. Try retracting the legs (so that the
projector lies flat) and then use the
the height of the image (see page 43).
If you need to extend the legs, you can still square up the image
with the
Keystone
■ If the projector is angled toward the screen from the left or right,
the image will be broader on one side. Center the projector in the
middle of the screen, facing the screen squarely.
If you can't place the projector this way, correct the shape using the
QuickCorner feature in the projector's menu system (see page 45).
button (on the
Auto/Enter
setting if the image is
Position
Lens Shift
button (see page 44).
button (on
Auto
button to adjust