note
The Focus and Zoom
buttons won't work when
the wide-angle rear
projection lens is installed.
Displaying and Adjusting the Image
42
Adjusting the Image
Once you see your image, you need to make certain adjustments:
To focus or zoom your image, see below.
■
If the image is too high or too low, you can reposition it. See
■
page 43.
If the image isn't square, see page 44.
■
If a computer image displays incorrectly, see page 46.
■
If you want to fine-tune the image and/or sound, see Chapter 4.
Focusing and Zooming Your Image
Use the
buttons on the remote control (or on the projector) to
Focus
sharpen the image.
Use the
buttons to reduce or enlarge the image.
Zoom
Focus
If the image still isn't large enough, you may need to move the
projector farther away from the screen. You can also use the
buttons on the remote control to zoom in on a portion of the image.
See page 57 for instructions.
Zoom
E-Zoom