2. Click
Register projector
You see this screen:
3. Click
Auto detect
network. Or click
name and network address. (Manual registration may be required
on some networks.)
Any projectors found on the network are listed as shown below:
4. Select the projectors you want to add by clicking their name.
Then click
, and on the next screen click
Add
as shown.
to locate projectors currently operating on the
Manual registration
Click here
and enter the projector's
Click here
.
Close
Managing the Projector from a Remote Computer
note
If the name of a projector
does not appear, you can
give it a name or change its
existing one in EMP
NetworkManager
(see page 95).
87