System Requirements; Installing The Software - Epson PowerLite 9300i User Manual

System Requirements

Before you install the software, make sure your system meets these
requirements:
Microsoft Windows 98 SE, Windows Me, Windows 2000
■
Professional, Windows XP Home Edition, Windows XP
Professional
Pentium MMX 166 MHz or higher
■
(Pentium II 233 MHz or higher recommended)
8MB or more memory
■
1MB or more of free hard disk space
■
XGA (1024 × 768) or better display adapter and monitor
■

Installing the Software

1. Turn on the computer's power, start Windows, and then place
the EPSON Projector Software for Multi Screen CD-ROM into
the computer's CD-ROM drive.
The installer will start automatically.
2. Click and follow the
Next
on-screen instructions.
3. The following screen appears
when the installation is complete.
Click .
Finish
Managing the Projector from a Remote Computer
note
Only users with
administrator rights can
perform the installation on
Windows 2000/XP.
note
If the setup program does not
start up automatically, click
Start > Run, then type the
drive letter of the CD-ROM
drive followed by
:\EMPMSA\SETUP.exe
and click OK.
97