1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite 9300i
  6. Quick manual

Epson PowerLite 9300i Quick Manual

Epson powerlite 9300i: product information
Hide thumbs Also See for PowerLite 9300i:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Indicator lights
Handle
IR receiver
Foot release
lever
Adjustable foot
DVI-D port
Network
(dual-link DVI)
port
BNC ports
(component
video)
S-Video
port
Control port
Hardwired
(RS-232C)
remote control
cable port
Note: Independent audio input connectors are provided for
each computer and video port.
Control panel
Speaker
Lens cover
Computer 1
Computer 2
port
port
USB
port
Video
port
(composite
video)
Audio Out port
Monitor Out
port
EPSON PowerLite 9300i Projector

Projector Specifications

General
Type of display
Size of LCD panels Diagonal: 1.4 inch (35.6 mm)
Lens
Resolution
Color reproduction 24 bit, 16.8 million colors
Brightness
Contrast ratio
Image size
Projection distance 3.6 to 49.2 feet (1.1 to 15 meters)
Projection methods Front, rear, upside-down front
Internal sound
system
Optical aspect ratio 4:3 (horizontal:vertical);
Zoom ratio
Noise level
Keystone correction
angle
Projection Lamp
Type
Power consumption 200 W
Lamp life
Part number
Remote Control
Range
Battery
Mouse compatibility
Supports USB mouse
10/03
Poly-silicon Thin Film Transistor
(TFT), active matrix
F=1.7 to 2.2, f=53 to 72 mm
×
1400
1050 pixels (SXGA+)
(native format)
Approx. 2500 ANSI lumens
1100:1 (in dynamic color mode)
22 to 300 inches
(ceiling mount), and upside-down rear
7 W monaural
supports 16:9 and 5:4
1:1.35
33 dB
±40° vertical
±20° horizontal
UHE (Ultra High Efficiency)
Up to 7000 hours
V13H010L26
about 30 feet (10 meters)
×
AA
2
EPSON PowerLite 9300i Projector
1
-

Advertisement

Table of Contents
loading

Related Manuals for Epson PowerLite 9300i

Summary of Contents for Epson PowerLite 9300i

  • Page 1: Projector Specifications

    Remote Control Audio Out port Range port Battery Mouse compatibility Supports USB mouse 10/03 EPSON PowerLite 9300i Projector Poly-silicon Thin Film Transistor (TFT), active matrix F=1.7 to 2.2, f=53 to 72 mm × 1400 1050 pixels (SXGA+) (native format) Approx. 2500 ANSI lumens...
  • Page 2 Macintosh PowerBook systems, and high-end workstations such as the Sun SPARCstation. Although images are displayed at the projector’s native resolution of 1400 × 1050 pixels, EPSON’s patented SizeWise ™ from VGA through UXGA. Signal To project images output from a computer, the computer’s...

  • Page 3: Positioning The Projector

    1280 × 1280 37 to 50 ft × 1280 × It’s best to place the projector directly in front of the center of 1280 1024 × the screen, facing the screen squarely. If it isn’t placed this 1280 1024 ×...
  • Page 4 Distance and Screen Size Calculations Use the calculations below to determine the how far to place the projector from the screen and the size of the screen. Standard Zoom Lens (V12H004S02) To find the distance when you know the screen’s diagonal...

  • Page 5: Connecting The Projector

    Connecting the Projector You can connect the projector to four computer sources or five video sources—up to a total of six sources altogether. You can include an independent sound channel for each of the six sources. Type of connections The following types of connections are possible, depending on...

  • Page 6: Displaying An Image

    Turning On the Projector 1. Remove the lens cap. Caution: Do not use the projector with the lens cap in place. The heat generated by the lens can damage the cap. 2. Connect the power cord to the projector, then plug the other end into a grounded electrical outlet.

  • Page 7: Troubleshooting Display Problems

    If you’re using a Windows/PC notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labeled pressing it. Allow a few seconds for the projector to sync up after changing the setting. The Projector and Notebook Don’t Display the Same Image If you’re projecting from a notebook, and you don’t see the...

  • Page 8: Adjusting The Image

    EPSON PowerLite 9300i Projector If you're using Macintosh OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select System Preferences...

  • Page 9: Adjusting The Height Of Your Image

    Adjusting the Image Shape In most cases, you can maintain a square or rectangular image by placing the projector directly in front of the center of the screen and using the Lens Shift (instead of tilting the projector upward) to adjust the image height.

  • Page 10: Shutting Down The Projector

    You can turn off sleep mode using the Setting menu. If the Advanced1 menu), the lamp will turn off but the projector will not go into full standby mode. Follow these steps to turn off the projector: 1.

  • Page 11: Using The Remote Control

    Press until it lights to use the numeric keypad. Used for setting remote control ID (see page 12). EPSON PowerLite 9300i Projector If the projector does not respond to the remote control, make Note: sure batteries are installed and the switch on its side is turned on.

  • Page 12: Controlling Multiple Projectors

    If you’re using more than one projector, you can control all the projectors—or just selected ones—by using the projector ID system. To operate a projector, you have to set the remote control’s ID to match that of the projector. Or you can control all of the projectors simultaneously by setting the remote control’s ID to zero.

  • Page 13: Monitoring Your Projector(S)

    7. When done making all necessary changes, press the menu system. Registering a Projector in EMP Monitor Before you can monitor a projector, you have to register it. Follow these steps: 1. Open EMP Monitor by selecting Start menu. You see this screen: Click here 2.

  • Page 14: Controlling Your Projector(S)

    (with the mouse pointer) before clicking one of the buttons. Control buttons Note: To turn on a projector when it’s in standby mode (plugged in but not projecting), you must have selected setting in the projector’s Advanced1 menu.
  • Page 15 If a projector experiences a problem, it sends an e-mail message to each of the addresses you provided using EMP NetworkManager. The message includes the heading “EPSON Projector” in the subject line. The body of the message contains: the name of the projector the projector’s IP address...

  • Page 16: Projector Status Lights

    If these lights come on after replacing the lamp, make sure the lamp is fully inserted and the lamp cover is attached. If all three lights are red, the projector has an internal problem. Unplug the power cord and contact EPSON for help.

  • Page 17: Cleaning The Lens

    To clean the air filters, follow these steps: 1. Turn off the projector and unplug the power cord. 2. To clean the filters, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, gently clean the filters with a soft brush (such as an artist’s paintbrush).

  • Page 18: Replacing The Lamp

    The lamp warning light is flashing red (the lamp is burnt out). Contact your dealer or call EPSON at (800) 873-7766 in the United States for a replacement lamp. Request part number . In Canada, please call (800) 463-7766 for V13H010L26 dealer referral.

  • Page 19: Optional Accessories

    High resolution document imager High resolution document camera You can purchase these accessories from your dealer, by calling EPSON at (800) 873-7766, or by visiting the EPSON Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.

This manual is also suitable for:

V11h071920 - powerlite 9300i sxga+ lcd projectorPowerlite 9300i - powerlite 9300nl multimedia projector

Table of Contents