Installing Multiple Projectors - Epson PowerLite 9300i User Manual

To remove the cover (when replacing the lamp and connecting or
disconnecting cables), release the locking tab on the bottom of the
cover as shown:

Installing Multiple Projectors

If multiple projectors are installed in one room, you can assign to each
projector a separate ID number. This lets the presenter use the remote
control to operate each projector independently (see page 52).
If you have multiple projectors installed at your place of business and
want to be able to monitor and control them over a network, see
"Managing the Projector from a Remote Computer" on page 81.
To open,
release the
locking tab
note
A remote control cable set
is available that lets you
operate the projector from
extended distances
(see page 14).
If you are projecting a single
image from multiple
projectors, you can use the
EMP Multi Screen software
to sync up the image
appearance.
Appendix A: Projector Installation
121