Securing The Projector; Setting Up Password Protection - Epson PowerLite 9300i User Manual

tip
When you turn on password
protection, you can attach
this sticker for additional
security:
Fine-tuning the Projector
78

Securing the Projector

You can add password protection to protect your projector from any
unauthorized use or tampering. Anyone who does not know the
password cannot use the projector to project images when the power is
turned on. Furthermore, the company logo and administrator's name
that are displayed when the power is turned on cannot be changed.
You can also purchase an optional Kensington MicroSaver anti-theft
device to connect to the lock port on the projector's left side. See
page 14 for ordering information.

Setting Up Password Protection

1. Press the button on the remote control for approximately
Freeze
five seconds.
The Password Protect menu appears.
Power ON Protect
Timer
Timer-el apsed
User's Logo Protect
Password
2. Use the pointer button to highlight
choose and press the
ON
3. You can set the time that the projector can be used without
needing to enter a password. Select
Password Protect
: ON OFF
Set
0H
:
0H
ON OFF
:
Set
Power ON Protect
button to select it.
Enter
and then press
Timer
, then
.
Enter