Epson PowerLite 9300i User Manual page 110

Status lights
Light Description and solution
When the power and temperature lights are red, the projector has overheated,
Red
which turns off the lamp automatically. Wait about 5 minutes for the projector to
cool, then unplug the power cord.
Verify that the air filter is not clogged. Clean or replace it as described on page 101.
Red
Make sure the room temperature is not above 95 °F (35 °C) and there is plenty of
space around and under the projector for ventilation. Then plug the power cord
back in and press the Power button.
If the projector continues to overheat, contact EPSON for help (see page 118).
Warning: Except as specifically explained in this User's Guide, do not attempt to
service this product yourself.
When the power light is red and the temperature light is flashing red, there is a
Red
problem with the fan or temperature sensor. Unplug the power cord and contact
EPSON for help (see page 118).
Red
When the power light is green and the lamp light is flashing orange, the lamp is
Green
near the end of its life. To ensure continued operation, you should replace it as
soon as possible (see page 103).
Orange
When the power light is red and the lamp light is flashing red, the lamp has burned
Red
out. Replace it as described on page 103.
Red
If these lights come on after replacing the lamp, make sure the lamp is fully
inserted and the lamp cover is attached.
If all three lights are red, the projector has an internal problem. Unplug the power
Red
cord and contact EPSON for help (see page 118).
Red
Red
Solving Problems
110
= on = flashing = off