Connecting An Rgb Video Source - Epson S5 Series User Manual

Connecting an RGB Video Source

Follow these instructions to connect the projector to a video player or
satellite receiver that has an RGB video output port using the VGA
computer cable that came with the projector.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Connect one end of the VGA computer cable to the
(Component Video)
2. Connect the other end to the video port on your player.
3. To play sound through the projector, follow the instructions
beginning on page 29.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select
as the source after projection starts by pressing the
Computer
button on the projector or remote control. See page 34.
Search
Downloaded From projector-manual.com Epson Manuals
port on the projector.
Connect VGA
computer cable
Computer
Source
Setting Up the Projector
27