Adjusting the Height of Your Image
If the image is too low on the screen, you can raise it using the Lens
Shift buttons. This is the best method for adjusting the height of the
image. If you need to raise the image further, you can tilt the projector
upward by extending the feet.
Using the Lens Shift
To raise or lower the image, use the
control (or on the projector).
Raising the Projector's Feet
If you need to raise the image further, you can incline the projector:
1. Stand behind the projector. Press the foot release buttons on each
side and lift the front of the projector.
buttons on the remote
Lens Shift
Lens Shift
note
The Lens Shift buttons
won't work when the
wide-angle rear projection
lens is installed.
Displaying and Adjusting the Image
43