Highlighting Your Presentation; Using The Pointer Tool - Epson PowerLite 9300i User Manual

Effect
button
Giving Your Presentation
60

Highlighting Your Presentation

You can display a pointer to call out something on the screen, or draw
straight or curved lines to emphasize particular points. There are three
preset pointer tools you can choose from, and each one can be
customized for a different look.

Using the Pointer Tool

1. To activate the pointer tool, press the
remote control. A pointer appears on the screen.
If you prefer to use a different style of pointer, continue pressing
the button to select the desired style. Three preset
Enter
options are available, but you can customize the look of each one
(see page 61).
2. Use the pointer button on the remote control to position the
pointer on the screen.
3. To draw a straight line, place the pointer where you want the line
to begin and press
line to end, and press
4. To draw a curved line, place the pointer at the start of the line,
then press and hold the
the pointer button to move the pointer and draw on the
screen. Press when done.
E
SC
5. If you want to draw additional lines, repeat steps 3 and 4.
6. When done drawing, press
Effect
. Move the pointer to where you want the
Enter
again.
Enter
button until it lights up. Then use
Enter
to clear the screen.
E
SC
button on the
Pointer