Connecting An Rgb Video Source - Epson PowerLite 1725 User Manual

note
Make sure the Input Signal
setting in the Signal menu is
set to Auto or Component
Video (see page 103).
Connecting to Computers, Cameras, and Other Equipment
48

Connecting an RGB Video Source

1. Locate the VGA computer cable provided with the projector.
2. Connect the cable to the video port on your player and the
Computer (Component Video)
3. If you want to play sound through the projector, see page 50 for
instructions on connecting audio cables.
4. If you don't need to make any other connections, see page 15 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
button on the remote control or the
Search
button on the projector's control panel.
port on the projector.
Source Search