note
Be sure your video player is
not a component video
source. If you select the
wrong source, image quality
may suffer. Check your
video player's
documentation.
Setting Up the Projector
24
Connecting an RGB Video Source
Connecting Using a VGA Computer Cable
1. Locate the VGA computer cable provided with the projector.
2. Connect the cable to the video port on your player and
the
or
Computer1
3. You may need to change the
projector's Signal menu to
4. If you want to play sound through the projector, see page 27 for
instructions on connecting audio cables.
5. When you've finished making any connections, see page 30 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
port on the projector.
Computer2
Input Signal
(see page 70).
RGB
setting in the