Connecting A Composite Video Source - Epson PowerLite 9300i User Manual

Connecting a Composite Video Source

1. Locate an RCA video cable (one may be provided with your video
equipment).
2. Connect the cable to the yellow video output connector on your
player and the yellow
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image. Once the projector is turned on, be sure to select
the source to see your image (see page 38).
connector on the projector:
Video
as
Video
Setting Up the Projector
21